(#13390)įixed turning tool preview in the tool library when the spindle rotation was changed. (#10978)įixed a memory leak for some turning grooving jobs. (#12454)įixed an issue where a grooving operation could fail if the back and front Z limits coincided with the extents of the groove geometry. For certain combinations of the spindle direction and handedness of the holder, the Safe Z coordinate was based upon the wrong side of the insert. (#12779)įixed an issue for turning face and chamfer operations with a turning or grooving tool. (#14313)Īdded an option for a turn parting operation to keep the parting tool down at the final toolpath point X coordinate or retract it to the clearance X coordinate. (#13725)įixed a problem in turning profile roughing operations with turning mode set to face profiling where the toolpath was not regenerated after the direction parameter in the operation was changed. (#13172)įixed an issue where an angled turning tool was incorrectly previewed in the tool library. (#13757)įixed an issue where a Constant Scallop toolpath might not calculate when up/down milling and 'other-way' linking was enabled. (#13747)įixed an issue which caused irregular cutting passes for Scallop toolpaths. (#13822)įixed an issue that introduced unnecessary retracts in Ramp operations. Unexpected lift and plunge to cover the gap. (#14593)įixed a problem in Contour toolpaths where ramps might not be connected to their cutting moves, resulting in an (#12127)įixed an issue that could occur when creating bore, circular and threading toolpaths around cylindrical bosses. (#11055)įixed an issue where preserve order was not respected in 2D Profile toolpaths. (#14294)įixed a crash that could occur in some cases after deleting the contour selection associated with a flat pattern. Removed machine orientation information from the Adaptive toolpath geometry tab. (#13030)įixed an issue in Adaptive where using a ballnose cutter as a reference tool was giving the wrong toolpath. (#12238)įixed an issue where calculating a 2D Adaptive toolpath with rest machining from a face selection could result in a large area being machined. Improved start entries for Adaptive Clearing toolpaths so that the toolpath starts in corners/endpoints rather than in the middle of a stock line. Improved Adaptive for tighter model contours it now finds a starting point on the stock boundary. (#13622)įixed several issues in which the toolpath computations for Adaptive Clearing could fail on Mac. Fixed an issue where 3D Adaptive Clearing with rest machining can fail with complex remaining stock.
0 kommentar(er)
